Description

This terminal adapter kit comes with (2) brackets for the positive and negative posts with the standard size of 6mm and makes for an easy installation when your motor sports vehicle requires a side or front mounted battery cable versus top mounting. Comes included with the larger sized batteries (ETX18B, ETX18F, ETX24C, ETX36C, and ETX36D, ETZ14C).

Note: The terminal adapters do not come with the ETZ5G, ETX12A, or any of the HUNDRED series batteries as it is rarely needed.

ETX-JMP12/24

$289.00

PLANES, CRANES AND AUTOMOBILES!

This is a 12V or 24V jump pack that can boost just about anything!

One of the most amazing gadgets out there! No need to ask anyone for assistance or get stranded anywhere. Very compact and the entire kit is only 4 pounds!

Jump Start:

Automobiles
Diesel trucks
Boats
Construction equipment
Experimental or Certified Aircraft
Tractors
Motorcycles
Snowmobiles
ATV/UTV’s
Riding lawnmower

This jump pack uses the technology of lithium iron phosphate (LiFePo4) chemistry, not Lithium Cobalt (LiCoO2)! This is a big deal! LiFePo4 is the most powerful, safest and most robust of all the lithium chemistries, plus double the life span of lithium cobalt packs.

What’s included in your kit:

Power pack (6″ x 3″ x 4″) LxWxH
(1) 12V & (1) 24V adapter cables
(1) jumper cables
Wall charger (100-240VAC 50/60Hz)
Carrying case

Features include:

(1) USB 5V/2.1A
(2) USB-C
High intensity LED flashlight
Charge level indicator LEDs
Once charged, will hold it charge level for up to a year!
Short circuit protection
Built in electronics to protect the battery
Unique rubber coating on the outside for ease of holding even in bad weather!
2 year warranty

Specs:

Boost Amps: 12V = 800, 24V = 400
Input: 15V / 2A
(1) USB 5V / 2.1A
(2) USB-C Ports
Capacity: 7.8Ah @ 12.8V
99 Wh

Quick Start Instructions

PRODUCT OVERVIEW

Thank you for purchasing the EarthX Jump Pack. Please follow all the use and safety instructions.

Fully charge the unit prior to its first use. Press the power button to check the state of charge (power level). One LED indicates low charge, 2 indicates 50%, 3 indicates 75% and four LEDs indicates 100%).

JUMP STARTING

Select the appropriate adapter cable (12 volt or 24 volt)
Connect the adapter cable to the Jump Pack. Both blue (EC5) connectors must be plugged into the EC5 sockets on the Jump Pack. Note: either connector can be plugged into either socket.
Connect the red jumper cable clamp to the positive post of the vehicle battery
Connect the black jumper cable clamp to the negative post of the vehicle battery or chassis ground (if battery negative is connected to chassis ground).
Plug the jumper cable into the adapter cables (connector only fits one way)
Start the vehicle (engine cranking should be limited to 10 seconds of cranking in any 1 minute period)
Disconnect negative clamp, then positive clamp after vehicle starts (recharge the Jump Pack after use)

Using USB Port for Charging Electronic Devices

Press the On/Off button for 1< second, the charge level indicator should light-up which is an indication the USB port is on. The unit will automatically shut-off after a few minutes of non-use.

LED Flashlight

Press the On/Off button for 3 seconds to turn on/off the flashlight.

RE-CHARGING

First, connect the 100-240VAC Plug-in Charger to outlet, then connect the 5mm round charge plug to the port on the Jump Pack, the charge level indicator light should start to cycle which is an indication the unit is charging. When all the indicator lights remain on, the unit is fully charged.

Never jump start a faulty battery (a battery that will not accept a charge or hold a charge).

Do not short circuit; ensure positive cable clamp does not touch negative clamp or any metal part of the vehicle.

If the battery gets hot while charging or use, discontinue charging and use. Maximum operating range is -20 Deg C to 60 DegC

Do not charge battery in temperatures above 140 degrees F (60C), or in direct sunlight.

When charging a battery, place it on a non-flammable surface, and remove any flammable items nearby.

Do not incinerate or expose to open flames!

Do not get wet or use in wet conditions or in presence of flammable liquids or gases!

Add to cart

ETX-QCC2 24″ EarthX Quick Connect Cables

$29.99

24″ Long Quick Connect Charging/Jump Start Cables

Name: Adapter-BCDEF
SKU: TAM
Price: 11.99 USD
Availability: InStock

You can permanently install this quick connect cable to your battery (lead acid or lithium) that can be used for quick, easy access for charging or be used with a portable jump starter to jump start your battery in seconds! No removal of seats, no removal of battery covers, no tools needed, no time wasted! Engineered and designed to carry 400 amps of energy without melting the wire by using 150 strand insulated copper wire. The standard SAE fitting will fit any standard portable jump pack on the market today.