-
BB-CO Light Weight Battery Box for “C” case
$49.00FREE SHIPPING IN THE USA!
This is a custom designed aluminum battery box designed specifically for the EarthX lithium battery ETX680C or any of the “C” cased batteries. This battery box was engineered to be strong enough to withstand 30 G of force yet only weighs 4.9 ounces or 140 grams and will fit your battery like a glove. This unique design allows for simple, easy installation with the dimensions: 5.9″ L x 3.4″ W x 4.5″H. Model number BB-CO
-
BB-CU Custom Light Weight Battery Box for “E” Case
$49.00FREE SHIPPING IN THE USA!
This custom designed battery box will fit your battery like a glove and is super easy to install!
Custom designed aluminum battery box for the ETX680/ETX900/ETX900-VNT and the ETX1200 series of EarthX batteries. This battery box was engineered to be strong enough to withstand 30 G of force yet only weighs 7 ounces or 198 grams and will fit the ETX680, ETX900/ETX900-VNT or ETX1200 like a glove. This unique design allows for simple, easy installation with the dimensions: 6.5″ L x 3.1″ W x 6.6″H. Note: if you purchased an ETX1200 prior to 12-1-2016, this battery box will not fit. Model number BB-CU.
-
BB-MU2- Light weight aluminum battery box
$89.00FREE SHIPPING IN THE USA!
The light weight aluminum battery box is excellent to use with the EarthX lithium “E” case batteries for easy installation!
Super easy installation and use of this newly revised and improved battery box! It has a bolt-down tab for easy removal of the battery from the front or top, and is acrobat rated (even with PC680 ).
This battery box can be used with:
- ETX680
- ETX900
- ETX900-VNT
- ETX1200
- Odyssey’s PC 680
If you are using the battery box for the EarthX Lithium batteries, you will use a foam spacer on the left and right side of the battery for a snug fit. If you are using the battery box for the PC680, you will use the foam spacer on the backside at the bottom of the case to adjust for the tapering of the case for a snug fit. That easy!
This battery box was engineered to be strong enough to withstand 30 G of force for the EarthX Lithium Batteries or 6G of upward force and 9G of downward force with the PC680. It only weighs 8.6 ounces or 244 grams. This unique design allows for simple, easy installation with the dimensions: 7.1″ L x 3.1″ W x 6.5-6.6″ (adjustable height) or (180mm x 80mm 166-168mm).
Included: top front removeable hold down tab, 2 screws for the hold down, and the battery box
-
BB-MU: Light Weight Battery box fit “E” case and PC680
$59.00FREE SHIPPING IN THE USA!
The light weight aluminum battery box is excellent to use with the EarthX lithium batteries for easy installation!
This battery box can be used interchangeably for the EarthX Lithium Battery models ETX680/900/900-vnt/1200 or the Odyssey PC680 with the use of a foam spacers. We call it the multi-use battery box for this reason.
$59.00
If you are using the battery box for the EarthX Lithium batteries, you will use a foam spacer on the left and right side of the battery for a snug fit. If you are using the battery box for the PC680, you will use the foam spacer on the backside at the bottom of the case to adjust for the tapering of the case for a snug fit. That easy!
This battery box was engineered to be strong enough to withstand 30 G of force for the EarthX Lithium Batteries or 15 G of force for the PC680 yet only weighs 8.6 ounces or 244 grams. This unique design allows for simple, easy installation with the dimensions: 7.1″ L x 3.1″ W x 6.5-6.6″ (adjustable)H or (180mm x 80mm 166-168mm).
As there are so many battery box options on the market, and different hole patterns possible, we do not know if the hole pattern will match up to your current situation so you might need to drill new holes on the flanges. Model number BB-MU.
Included: top front hold down, 2 screws for the hold down, and the battery box
-
BB-TH Thermal Battery Box “E” case
$115.00FREE SHIPPING IN THE USA!
Thermal battery box to protect from radiated or convection heat!
The EarthX thermal battery box is designed to protect the battery in engine compartment installations from periods of high temperature (up to 1 hour), such as after shutdown, and from radiant heat from hot surfaces like exhaust systems during and after flight. This stainless-steel box has a mirror finish to minimize the effect of radiant heat, and it has a high-performance insulating foam layer between the box and battery to reduce effect of convection heat. The hold-down tab comes with a mounting fixture that can hold a cooling air duct up to 1” in diameter. This battery box was engineered to be strong enough to withstand 30 G of force yet only weighs 1 pound.
All batteries have optimal temperature ranges for use in operation. The ETX hundred series is rated for 140 deg F ( 60 deg C) or less for optimal longevity and performance of the battery. Typical lead acid batteries are rated to 113 deg F or 45 deg C.
This battery box is designed to be compatible with our existing “E” case battery models; ETX680/900/1200.
The “Convection” graph shows the battery (not cell) temperature rise with a test environment of 185 Deg F (85 deg C). In this case there was a 5.3X improvement in the time to heat up the battery.
-
BB-TH-CO Thermal Battery Box “C” case
$115.00FREE SHIPPING IN THE USA!
Thermal battery box to protect from radiated or convection heat!
The EarthX thermal battery box is designed to protect the battery in engine compartment installations from periods of high temperature (up to 1 hour), such as after shutdown, and from radiant heat from hot surfaces like exhaust systems during and after flight. This stainless-steel box has a mirror finish to minimize the effect of radiant heat, and it has a high-performance insulating foam layer between the box and battery to reduce effect of convection heat. This battery box was engineered to be strong enough to withstand 30 G of force yet only weighs 1 pound.
All batteries have optimal temperature ranges for use in operation. The ETX hundred series is rated for 140 deg F ( 60 deg C) or less for optimal longevity and performance of the battery. Typical lead acid batteries are rated to 113 deg F or 45 deg C.
This battery box is designed to be compatible with our existing “C” case battery models; ETX680C.
The “Convection” graph shows the battery (not cell) temperature rise with a test environment of 185 Deg F (85 deg C). In this case there was a 5.3X improvement in the time to heat up the battery.
-
BB-TH-U Thermal Battery Box “U” case
$125.00FREE SHIPPING IN THE USA!
Thermal battery box to protect from radiated or convection heat!
The EarthX thermal battery box is designed to protect the battery in engine compartment installations from periods of high temperature (up to 1 hour), such as after shutdown, and from radiant heat from hot surfaces like exhaust systems during and after flight. This stainless-steel box has a mirror finish to minimize the effect of radiant heat, and it has a high-performance insulating foam layer between the box and battery to reduce effect of convection heat.
All batteries have optimal temperature ranges for use in operation. The ETX hundred series is rated for 140 deg F ( 60 deg C) or less for optimal longevity and performance of the battery. Typical lead acid batteries are rated to 113 deg F or 45 deg C.
This battery box is designed to be compatible with our existing “U” case battery models; ETX1600, ETX900-24, ETX680-24-VNT.
The “Convection” graph shows the battery (not cell) temperature rise with a test environment of 185 Deg F (85 deg C). In this case there was a 5.3X improvement in the time to heat up the battery.
-
BB-U Light Weight aluminum battery box for “U” Case
$89.00FREE SHIPPING IN THE USA!
This custom fit designed battery box for the ETX1600 or the ETX900-24 battery. Fits like a glove and is super easy to install!
This battery box has a removable hold down bracket which allows the battery to be removed from the top or the front for easy installation and use! It is made of aluminum weighing only .3Kg (.67 lb), yet can handle 9Gs force downward and 6Gs upward.