Terminal adapters are included with this battery if you have a front mount connection with the standard size of 6mm.
Replaces Yuasa: YTZ10S, YTX9-BS, YT12A-BS and is an OEM fitment for the YTZ10S.
The ETX18F is a lithium iron phosphate (LiFePO4) starter battery designed to produce high cranking amps to turn over your engine and lasts much longer than your lead acid battery. EarthX ETX series of starter batteries are the most innovative and technology advanced batteries on the market! EarthX has an exclusive fully integrated battery management system (BMS) to protect the cells so you will have a premium performance battery and better longevity!
–Over discharge protection (#1 killer of all batteries and other brands do not protect against this and void the warranty)
–Over charge protection (Other brands do not protect against this and void the warranty)
–Built in cell balancing technology (Other brands must use a special balancing charger in order to level the charge of each cell. Your vehicle is what charges the battery most of the time, if you do not have built in cell balancing technology, how is your battery balanced while using it?)
– Short circuit protection up to 1,000 amps (Other brands void the warranty if you short the battery)
–Excessive cranking protection (Lithium technology is different than a lead acid battery and needs to be protected from heat)
–2 year full coverage warranty (Not a prorated warranty that offers you the replacement at a discounted rate if they don’t void the warranty)
–Unique and exclusive design (Custom design with the terminals down the center and most models come with solid brass terminal adapters for extremely easy installation. You can choose an OEM fit or a compact fit)
– Designed, engineered and assembled in the USA
Why choose an EarthX lithium battery? S P E E D
S= SPEEDY CHARGING- EarthX ETX batteries will charge 2-3X faster than a lead acid battery.
P= POWERFUL and LONG LASTING- EarthX ETX batteries crank your engine over easily and will improve your starting performance as their resting voltage is 13.3V compared to a lead acid which is only 12.6V. Also EarthX ETX batteries life span is much longer than a lead acid battery and can last years longer!
E= EXTREMELY LIGHT WEIGHT- EarthX ETX batteries are up to 80 percent lighter than their lead acid equivalents. Lighter weight = better performance! This saves an average of 2-3 lbs. for dirt bikes, 6-8 lbs. for street bikes and 10-20 lbs. for touring and cruiser bikes.
E= ENVIRONMENTALLY FRIENDLY- EarthX ETX batteries are environmentally and user friendly. Nonhazardous, nontoxic, nonpoisonous. Will not sulfate, will not corrode, will not freeze, will not boil over, will never need water added and will not spill acid EVER!
D= DISCHARGE RATE- EarthX ETX batteries have a much slower discharge rate than a lead acid and the need to charge them is greatly reduced.
Available on backorder
You can permanently install this quick connect cable to your battery (lead acid or lithium) that can be used for quick, easy access for charging or be used with a portable jump starter to jump start your battery in seconds! No removal of seats, no removal of battery covers, no tools needed, no time wasted! Engineered and designed to carry 400 amps of energy without melting the wire by using 150 strand insulated copper wire. The standard SAE fitting will fit any standard portable jump pack on the market today.
This is a 12V or 24V jump pack that can boost just about anything! PRE-SELLING NOW, WILL SHIP EARLY PART OF MAY!
This jump pack uses the technology of lithium iron phosphate (LiFePo4) chemistry, not Lithium Cobalt (LiCoO2)! This is a big deal! LiFePo4 is the most powerful, safest and most robust of all the lithium chemistries, plus double the life span of lithium cobalt packs.
Quick Start Instructions
Thank you for purchasing the EarthX Jump Pack. Please follow all the use and safety instructions.
Fully charge the unit prior to its first use. Press the power button to check the state of charge (power level). One LED indicates low charge, 2 indicates 50%, 3 indicates 75% and four LEDs indicates 100%).
Using USB Port for Charging Electronic Devices
Press the On/Off button for 1< second, the charge level indicator should light-up which is an indication the USB port is on. The unit will automatically shut-off after a few minutes of non-use.
Press the On/Off button for 3 seconds to turn on/off the flashlight.
First, connect the 100-240VAC Plug-in Charger to outlet, then connect the 5mm round charge plug to the port on the Jump Pack, the charge level indicator light should start to cycle which is an indication the unit is charging. When all the indicator lights remain on, the unit is fully charged.
Never jump start a faulty battery (a battery that will not accept a charge or hold a charge).
Do not short circuit; ensure positive cable clamp does not touch negative clamp or any metal part of the vehicle.
If the battery gets hot while charging or use, discontinue charging and use. Maximum operating range is -20 Deg C to 60 DegC
Do not charge battery in temperatures above 140 degrees F (60C), or in direct sunlight.
When charging a battery, place it on a non-flammable surface, and remove any flammable items nearby.
Do not incinerate or expose to open flames!
Do not get wet or use in wet conditions or in presence of flammable liquids or gases!
The Optimate TM-291 Lithium charger will charge and maintain your lithium battery with 5 amps of energy so your battery is ready to go when you are! If you want a faster charger, there is also the 9.5 amp version below that also has a “tune” or power source mode of delivering 8 continuous amps of energy so you can program your EFIS or retune your car, click below if you want those features for an additional $40.
To reset an EarthX battery that is in the over discharge protection mode, connect alligator clips FIRST, and then plug unit into the wall. You will see the lights go to the save mode.
Use discount code CJP10 to get $10 off a Charger when purchased with an EarthX Battery. Dismiss